|
职位一: 嵌入式软件工程师（北京/南京/宁波）2名
职位描述：
1.参与嵌入式系统移植和应用开发；
职位要求：
1. 要求电子、通信、计算机、自动化等专业本科/硕士/博士研究生；
2.熟悉单片机、DSP、FPGA中的一项或多项；
3.熟悉PCB设计；
4.熟悉C/C++/汇编/verilog中的一项或多项；
5.熟悉以太网协议或无线局域网协议，结合无线网卡硬件完成系统联调，并设计实现相应的原型设备；
6.熟悉windows或linux平台的驱动/应用程序开发和调试技术；
Embedded Software Engineer
Location: Beijing/Nanjing/Ningbo
Job Description：
1.Participate in embedded system migration and application development.
Requirements:
1.Requires outstanding undergraduate/master's/doctoral students in electronics, communication, computer, automation, etc.
2.Be familiar with one or more of microcontroller, DSP, FPGA.
3.Be familiar with PCB design is especially good.
4.Be familiar one or more of C/C++/Assembly/Verilog.
5.Be familiar with Ethernet protocol or wireless LAN protocol, complete system joint debugging with wireless network card hardware, and design and implement corresponding prototype equipment.
6.Familiar with driver/application development and debugging techniques for windows or linux platforms.
职位二:硬件系统设计（北京/南京/宁波） 1名
职位描述：
1.负责沟通项目及产品需求，完成项目中系统方案的设计；
2.负责通信系统、嵌入式系统的硬件原型系统设计与开发；
3.负责硬件电路设计调试、器件选型以及设计文档编写；
4.熟练使用Cadence工具或其他电路设计软件进行多层混合信号PCB的设计；
职位要求：
1.要求微电子、通信、自动化、计算机等专业本科、硕士/博士研究生；
2.熟悉驱动设计实现、应用程序开发、上位机编程、APP编程设计等；
3.熟悉系统设计的整体流程，具备FPGA调试、嵌入式开发或者PCB设计经验者；
4.熟悉设计高速PCB板级系统；
Hardware system design
Location: Beijing/Nanjing/Ningbo
Job Description
1.Responsible for communicating project and product requirements, completing the design of the system solution in the project.
2.Design and development of hardware prototype system for communication systems and embedded systems.
3.Responsible for hardware circuit design and debugging, device selection and design documentation.
4.Proficiency in the design of multi-layer mixed-signal PCBs using Cadence tools or other circuit design software.
Requirements:
1.Requires excellent undergraduate, aster/doctoral students in microelectronics, communications, automation, and computer science.
2.Be familiar with driver design implementation, application development, PC programming, APP programming design, etc.
3.Be familiar with the overall process of system design, with experience in FPGA debugging, embedded development or PCB design is preferred.
4.Be familiar with designing high speed PCB board level systems.
职位三:生产工程师（宁波/南京） 1名
职位描述:
1.按照销售部的预算/订单/库存/备料情况制定采购和生产计划；
2.组织内部团队和外协厂按计划生产，包括PCB，贴片，烧录，校准和测试等；
3.依生产工艺进行产品部件生产、组装、测试、实验等作业，不良品处理等并持续改进；
4.跟踪生产过程自检、异常反馈，生产资料的记录及整理；
5.测试设备调试点检及维护保养；
6.精确确认产品用料，负责BOM及其维护工作；
7.和研发、库管合作，提高公司生产效率，降低损耗；
职位描述:
1.按照销售部的预算/订单/库存/备料情况制定采购和生产计划；
2.组织内部团队和外协厂按计划生产，包括PCB，贴片，烧录，校准和测试等；
3.依生产工艺进行产品部件生产、组装、测试、实验等作业，不良品处理等并持续改进；
4.跟踪生产过程自检、异常反馈，生产资料的记录及整理；
5.测试设备调试点检及维护保养；
6.精确确认产品用料，负责BOM及其维护工作；
7.和研发、库管合作，提高公司生产效率，降低损耗；
Production engineer (Location: Ningbo/Nanjing)
Job Description
1.Make purchase and manufacture plan, according to sales forecast/order/inventory condition.
2.Monitor manufacture process, by internal and sub-contractor, including phase of PCB, SMT, firmware program and test.
3.Tracking the production process self-test, abnormal phenomenon, and manufacturing.
4.Maintain and verify test equipment maintenance regularly.
5.Accurately confirm the materials used in the product, and be responsible for the BOM and its maintenance work.
6. Coordinate R&D and inventory management, life efficiency and lower the manufacture loss.
Requirements:
1.College degree or above, major in electronics.
2.More than 3 years of production experience in the electronics industry.
3.Proactive and responsible, with a good team member.
4.With certain PCBA manual solding and defective product analysis and processing capabilities.
5.Familiar with the circuit principle, have the ability to analyze the circuit diagram.
6.Experience in repairing WiFi products is preferred.
联系方式：
联系人：刘小姐
Email：hr@ralinwi.com
Tel: 025-68205771
|